While pursuing the material and spiritual happiness of employees, through scientific research and innovation, continuously improve and optimize the metal roof system, and contribute to the beautification and improvement of global human settlements

Woodworking clamp is an essential tool for woodworking, with a simple structure and flexible use, making it a good helper for making woodworking work. Types: Woodworking clips can be roughly divided into A-type clips, G-type clips, F-type clips, channel steel clips, etc.

1. A-clip

This type of clamp mainly relies on the force of the spring, so the force is relatively small and the opening is limited. The advantage is lightweight and cheap.

2. F-clip

The general structure of this type of clamp is composed of a fixed claw and a movable claw fixed to an iron rod. There is a screw handle on the movable claw for locking. This type of clip is considered the most popular woodworking clip. He has many variants, and let's first talk about the two most common ones. One is the iron plate with several springs on the movable claw to support it, so that the movable claw will not easily slide. In addition, without this device, the movable claw may slide on its own without any force. I personally prefer those without spring metal plates, which are easy to get stuck, especially when there is wood glue on them. Moreover, most of the time I don't realize how much impact the sliding claws have on themselves

3. Quick clip/pistol clip

It is also similar to the F-clamp, but uses a trigger mechanism to replace the screw locking. Lightweight quick clamps generally have low strength and poor feedback, which means that it is not known whether they have been clamped or not. They are relatively convenient to use in places that do not require strong temporary fixation. The heavy-duty fast selling force is not inferior to traditional F-clips, but it can be operated with one hand, which is very helpful in the process of seizing time and bonding.

4. Water pipe clamp

The principle is similar to the F-clamp, except that standard water pipes are used instead of metal rods. The advantages are cheap price, arbitrary length, and high strength. The disadvantage is that the depth of the clamp is limited.

5. Parallel clamp

The principle is similar to that of the F-clip and has also evolved. The improvement is mainly on the movable claw, which is covered with a layer of shell that slides on the iron rod. This layer of shell ensures parallelism with the iron rod, so it can be considered that the two claws of the clamp are parallel. Due to the need to maintain parallelism.

6. C-clip

This type of clamp is very common in the metal processing industry, and can also be used for woodworking. Its advantages are cheap, powerful, and cheap. The disadvantage is that the adjustment is relatively slow and not suitable for the tense bonding process.

7. Traditional wooden clip

The structure is very simple, with two pieces of wood and two screw rods. Can control the angle and width of the clamp. There are many other ways to use it, such as first clamping the wooden clamp onto the leg clamp of the woodworking table and then clamping the workpiece to raise the height or fix the workpiece at an angle. Or used to vertically fix multi-layer boards.